bossgoo服务/售后/程序多重升级
The hydraulic baler includes a bracket with a bottom plate and front and rear side baffles, a jack is installed on the bracket, the jack is provided with a piston rod, a vertical push plate is connected to the right end of the piston rod, and a push material is connected to the right side of the push plate Slats, the gap between the adjacent pushing slats is the rope-penetrating groove on the board; the upper right part of the bracket has a presser upper baffle, and the bracket on the left side of the presser upper baffle has a feed inlet; front and rear sides The brackets on the right side of the baffle are fixedly connected with front and rear side bars respectively, and the gap between adjacent side bars is a rope hole; the right end of the bracket has a discharge port, and the right end of the bracket at the discharge port is hinged with a door panel and a door panel Door slats are connected to the left side, and the gap between adjacent door slats is the rope slot on the door; the cavity enclosed by the front and rear side baffles, the pusher plate and the bottom plate is the feed cavity, the front and rear side baffles, and the material The cavity enclosed by the upper baffle, the door plate and the bottom plate is the extrusion cavity; the door plate and the right end of the bracket are fixedly connected with a locking device. The size of the package can be adjusted within a certain range as required.